Results 1 to 7 of 7

Thread: Signature and Professional Seal

  1. #1
    Member EarthRevi's Avatar
    Join Date
    August 13, 2018
    Posts
    83
    Current Local Time
    03:49 AM

    Not allowed! Not allowed!

    Signature and Professional Seal

    What is the best way to create the professional seal in Revit? In autocad we use blocks... Would I need to create a family for a professional seal? Or is an png the best practice?

  2. #2
    Senior Member chris.macko's Avatar
    Join Date
    April 12, 2011
    Location
    Chicago, IL
    Posts
    542
    Current Local Time
    03:49 AM

    Not allowed! Not allowed!
    We use a generic annotation family with the image file inside. That way you can assign some parameters to it to turn it on or off in a titleblock and make sure the size stays consistent.

  3. #3
    Mr. Revit OpEd
    Join Date
    December 14, 2010
    Posts
    3,167
    Current Local Time
    01:49 AM

    Not allowed! Not allowed!
    Dont put it in Revit at all. Apply stamps during printing at the plotter or via software like Bluebeam.

  4. #4
    Moderator DaveP's Avatar
    Join Date
    January 10, 2011
    Location
    St Paul, MN
    Posts
    3,291
    Current Local Time
    03:49 AM

    Not allowed! Not allowed!
    Ditto.
    You can create a "pure" Revit family by tracing over the image, but it's really not worth the effort. Especially since every state's stamp will be different.
    Last edited by DaveP; March 6th, 2019 at 03:27 PM. Reason: My "Ditto" was for chris's post, not Steve's

  5. #5
    Administrator Twiceroadsfool's Avatar
    Join Date
    December 7, 2010
    Location
    Dallas, TX
    Posts
    11,017
    Current Local Time
    03:49 AM

    Not allowed! Not allowed!
    Quote Originally Posted by chris.macko View Post
    We use a generic annotation family with the image file inside. That way you can assign some parameters to it to turn it on or off in a titleblock and make sure the size stays consistent.
    +1.

  6. #6
    Senior Member DavidLarson's Avatar
    Join Date
    July 10, 2015
    Location
    Boise, Idaho
    Posts
    782
    Current Local Time
    02:49 AM

    Not allowed! Not allowed!
    We have them built into the titleblock. We're a small enough company that it's not too complex. Each of the stamps were traced and put into generic annotation families and tied into the sheet submittal date.

  7. #7
    Member EarthRevi's Avatar
    Join Date
    August 13, 2018
    Posts
    83
    Current Local Time
    03:49 AM

    Not allowed! Not allowed!
    thanks guys <3

Similar Threads

  1. RTC: Seal of Approval
    By RTC in forum Blog Feeds
    Replies: 0
    Last Post: June 25th, 2018, 04:15 PM
  2. Replies: 1
    Last Post: January 13th, 2017, 01:47 PM
  3. Not Logged in Means No Signature?
    By mertens3d in forum Forum Suggestions and Feedback
    Replies: 4
    Last Post: March 11th, 2013, 09:05 PM
  4. Signature images
    By cwetzel in forum Forum Suggestions and Feedback
    Replies: 6
    Last Post: June 27th, 2012, 02:33 PM
  5. Washington State Stamp/Seal
    By Alex Cunningham in forum Architecture and General Revit Questions
    Replies: 16
    Last Post: June 28th, 2011, 09:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •