Results 1 to 4 of 4

Thread: Filled Regions in legends don't match Floor Plan wall poche

  1.    #1
    New Member
    Join Date
    November 14, 2019
    Posts
    2
    Current Local Time
    10:24 AM

    Not allowed! Not allowed!

    Filled Regions in legends don't match Floor Plan wall poche

    Hello,

    As i was creating legends in Revit 2019 I found that the filled regions - though created to match the phase overrides, did not match the plans.

    See images...

    Additionally, the weird thing is that when I paste that same filled region into the plan, the colors match. There are no overrides in the visibility graphics.
    Any ideas on what might be happening here and how to fix would be great.

    Thanks in advance,
    Attached Thumbnails Attached Thumbnails Filled Region.PNG   Legend vs Plan.PNG   Pasted Filled Region.PNG   Phase Overrides.PNG  

  2.    #2
    Moderator cellophane's Avatar
    Join Date
    August 9, 2011
    Location
    Louisville, KY
    Posts
    6,287
    Current Local Time
    05:24 AM

    Not allowed! Not allowed!
    Do you have any element overrides applied? I just made a file with a new wall, existing wall, filled region, and a legend and didn't run into this. The only thing I noticed was the fills looked a little different depending on my zoom level.

  3.    #3
    Senior Member PatrickGSR94's Avatar
    Join Date
    July 7, 2017
    Location
    Hernando, MS
    Posts
    534
    Current Local Time
    04:24 AM

    Not allowed! Not allowed!
    Check the settings for the Phase-Existing material also.

  4.    #4
    New Member
    Join Date
    November 14, 2019
    Posts
    2
    Current Local Time
    10:24 AM

    Not allowed! Not allowed!
    Thank you for the help! I did have an override on it, but did not think anything of it because it was for the line not the fill but i cleared the override and it worked. I didn't realize that would make a difference. Went ahead and created a lineweight rather than using the override.

    Thanks!

Similar Threads

  1. Poche doors and display their width dimension on floor plan
    By a1e in forum Architecture and General Revit Questions
    Replies: 9
    Last Post: August 26th, 2016, 06:20 PM
  2. Filled Regions!
    By Jamma79 in forum Architecture and General Revit Questions
    Replies: 13
    Last Post: May 8th, 2014, 10:11 PM
  3. Cannot tag over filled regions?
    By Andres Franco in forum Architecture and General Revit Questions
    Replies: 2
    Last Post: October 15th, 2013, 09:11 PM
  4. render tile of wall and floor grount match
    By mrd0512 in forum Rendering and Gallery
    Replies: 3
    Last Post: June 28th, 2013, 08:42 AM
  5. Parametric Filled Regions???
    By Alex Cunningham in forum Architecture - Family Creation
    Replies: 2
    Last Post: April 21st, 2012, 06:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •