Results 1 to 4 of 4

Thread: Sloped Conduit

  1. #1
    New Member
    Join Date
    April 22, 2018
    Location
    Massachusetts
    Posts
    2
    Current Local Time
    11:11 PM

    Not allowed! Not allowed!

    Sloped Conduit

    I have a project that requires the conduit under the roof to follow the slope of the roof.

    I created a sloped named reference plane but I found that you cannot draw conduit on a reference plane, only a level and I cannot create a sloped level.

    Any suggestions?
    I have thousands of feet to draw.

  2. #2
    Member Knitro87's Avatar
    Join Date
    December 3, 2014
    Location
    Austin, TX
    Posts
    307
    Current Local Time
    10:11 PM

    Not allowed! Not allowed!
    While in a section or elevation view, you should be able to align the conduit to a roof plane. Then select the conduit, and move (or modify Offset) to the desired location.
    Last edited by Knitro87; March 10th, 2021 at 02:24 PM. Reason: spelling

  3. #3
    New Member
    Join Date
    April 22, 2018
    Location
    Massachusetts
    Posts
    2
    Current Local Time
    11:11 PM

    Not allowed! Not allowed!
    I know that I can align it after I draw it, but I have thousands of feet to draw and I just wanted to draw it all in a floor plan view on the slope of the roof.

  4. #4
    Forum Addict tzframpton's Avatar
    Join Date
    January 17, 2011
    Location
    Dallas, TX
    Posts
    2,153
    Current Local Time
    10:11 PM

    3 Not allowed! Not allowed!
    Rotate a Section, then go in the View. Works like a champ.

    -TZ

    *EDIT* Let me clarify: Rotate a Section while in a Section/Elevation View, where it's faced "down" but at the proper degree slope of the roof.
    Attached Thumbnails Attached Thumbnails _ATTACHMENT.jpg  
    Last edited by tzframpton; March 10th, 2021 at 05:02 PM.

Similar Threads

  1. different conduit colors
    By Ning Zhou in forum MEP - General
    Replies: 16
    Last Post: February 9th, 2017, 03:01 PM
  2. Tag how many conduit are in a run
    By cbaze in forum MEP - General
    Replies: 1
    Last Post: June 23rd, 2016, 11:05 AM
  3. sloped wall joined to sloped roof
    By sohn in forum Architecture and General Revit Questions
    Replies: 4
    Last Post: May 14th, 2016, 11:12 AM
  4. Conduit Run Schedule
    By cphubb in forum MEP - General
    Replies: 12
    Last Post: August 10th, 2015, 02:51 PM
  5. Sloped glazing in sloped wall
    By stl4310 in forum Architecture and General Revit Questions
    Replies: 25
    Last Post: September 7th, 2012, 08:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •