Shape handle missing on truss members

[f1nac]

Hello guys. I just created a family (triangular shape) truss. It is all fine when I tested in blank project, but when I imported that in my working project, suddenly members on top chord after unpinning are not showing shape handles when I try to stretch them to cope them with beam on bottom chord, only point. In blank project it was all fine, shape handles on same position appeared after unpinning

[elton williams]

have you tried disallow join on the individual beams?

[f1nac]

have you tried disallow join on the individual beams?

Yup. Nothing happens. Tried making those 2 chords as strong reference as well, nothing. I just don't get it. In blank model they're showing up, in other I'm unable to see them and that happens only on top chord..

[Nurlan]

Hi,
Theproblem may be with the structural framing family and not the truss. Try to replace the suspect family with a verified one.

[f1nac]

Hi,
Theproblem may be with the structural framing family and not the truss. Try to replace the suspect family with a verified one.

It is the same as bottom chord in model. Same beam element. It is even default from revit base. If you meant on changing that element

[Nurlan]

Then maybe you applied one of the modifiers on the Steel tab? If so, then the structural framing has been converted to the steel fabrication shape.